ORIGINAL_ARTICLE
Predicting the Organizations Success in ISO Systems Implementation Based on Discriminant Analysis
Today, many organizations have focused on the issue of quality (total quality management (TQM) and ISO standards) to sustain their survivalsurvive in the market and to respond customers' needs appropriately and timely, but the success of implementation of these systems is doubtful. Public and private organizations in Bushehr and Shiraz (which have implemented the ISO systems) were chosen to identify variables affecting these systems success. After reviewing the theoretical literature, these variables are categorized into 4 segments: managerial, personnel (employees), external and cultural. Questionnaire was used to gather data. Data were analyzed using Discriminant Analysis. The results indicate that the most important ISO implementation variables are 1) continuous improvement in the organization, 2) ISO Compatibility with strategies and organizational structure, and 3) the quality of internal and external communications. Based on these results, these three variables can estimate correctly ISO implementation success levels as 80.2 percent.
https://jimp.sbu.ac.ir/article_87327_cc06c59fcf01660d7ca41f55b68eb0c0.pdf
2013-02-19
9
34
Quality Management Systems
ISO
Total Quality Management
Seyed Yaghoub
Hosseini
hosseini@pgu.ac.ir
1
Assistant Professor, Persian Gulf University.
LEAD_AUTHOR
Fahimeh
Shafiei
2
MA student, Persian Gulf University.
AUTHOR
Misam
Dastranj
3
MA student, Persian Gulf University.
AUTHOR
ORIGINAL_ARTICLE
Dredging Industry Attractivness Measurement & Analysis in Iran through the Porter's Five Competitive Forces
One of the paradigms that can be used in applicable manner to determine attractiveness and profitability of dredging industry in Iran is the reputation platform of Porter's 5 competitive forces. In this article, the attractiveness of dredging industry in Iran is analyzed and measured based on this model. The main question of the Research is whether investing in Iranian Dredging Industry is Profitable or not. The results indicate that among the competitive forces, suppliers are the main threatening factor in the industry and have relatively high bargaining power and possess approximately more importance and influence than the other forces on the reduction of dredging industry attractiveness in Iran, also the rivalry among dredging companies is increasing and it is considerable threat. The threat resulting from potential rivals and substituting products are a few and the clients have low bargaining power. Each of these three variables is considered as opportunity forces in the industry. According to desirability of the three forces and the results of statistical analysis, dredging industry is attractive in Iran and its investment is profitable. This study is an applied one in terms of purpose and it is considered as a descriptive-surveying study In terms of nature and method. Statistical society of research consists of 170 expert persons. The 124 people were chosen as test subjects by classified random sampling method. In this study a close researcher-made questionnaire was used to collect data.
https://jimp.sbu.ac.ir/article_87328_31f8b513009b58cf00a553f587b55008.pdf
2013-02-19
35
60
Dredging industry
Aattractiveness
Five competitive forces of porter
Competition
Threat
Mohammad Reza
Hamidizadeh
hamidizadeh@sbu.ac.ir
1
Professor, Shahid Beheshti University.
AUTHOR
Hassan
Farsijani
h-farsi@sbu.ac.ir
2
Associate Professor, Shahid Beheshti University.
AUTHOR
Parviz
Moghaddas
p_moghadas@yahoo.com
3
MA student, Pyamnoor University.
LEAD_AUTHOR
ORIGINAL_ARTICLE
Provide an Integrated Methodology for Combining the Kano Model and Quality Function Deployment (QFD) to Improve the Quality of Banking Services Rough Sets Approach
Increasing market share as one of the goals of the organization wouldn't happen without increasing the customer’s satisfaction of through improving service quality. The present study sought to examine the level of service quality offered in one of the subsidiary of BSI and solutions for improving the quality of service at this branch. The application of this study is base on survey method. In this study, the clients of BSI branch are under experiment. Because the clients are unlimited we used Cochran formula, share questionnaires to 170 people and calculate the result based on 0.11 variance. Techniques used in analyzing the data of this research consist of: gap analysis model to identify gaps between expectations and perceptions of service quality elements of the bank's customers, Kano model, this study aimed to identify needs and offer attractive solutions to improve them , Quality Function Deployment Model used To provide strategies for improving the performance and set priorities for action identified by the Kano model and improving them. To avoid ambiguity in quality matrices of the data of this research, Rough set theory was used. The result of analyzing data shows that each of 29 components has gaps and the Result of Kano model indicate that 9 components assumed attractive. In order to promote the quality of services in this branch, base on the view of authorities, 10 technical features were identified and prioritized.
https://jimp.sbu.ac.ir/article_87329_753e28ae8c6efc4b8b008c6a52d657f1.pdf
2013-02-19
61
89
Service Quality
Rough Set Theory
Kano's Model
Quality Function Deployment Model
Seyed Haider
MirFakhradini
1
Associate Professor,Yazd University.
AUTHOR
Saeid
Peirow
speirow@gmail.com
2
MA Student,Yazd University.
LEAD_AUTHOR
ORIGINAL_ARTICLE
An Integrated Approach for Supplier Selection in a Supply Chain: IT Capabilities Approach
In most industries the cost of raw materials and component parts constitutes almost 60% percent of cost of a product (in some industries up to 80%). In this situation، proper sourcing can play a key role in an organization's efficiency and effectiveness، because it has a direct effect on cost reduction، profitability and flexibility of a company. In this paper، a hybrid model consist of Decision making trial and evaluation laboratory- DEMATEL and analytic network process-ANP is presented. In order to construct the inter relation between criteria, DEMATEL is used and to incorporate the effective criteria، analytic network process approach is utilized. Considering increasing importance of IT in supply chain's success, IT capabilities is applied as separate criteria. After developing the model، a numerical example is presented. Result shows that financial and cost, delivery, and IT capabilities are most criteria in supplier selection process. At the end، results and suggestion will be provided.
https://jimp.sbu.ac.ir/article_87330_7f856fcf3de61b9a98667c931163d81b.pdf
2013-02-19
91
115
Supply Chain Management
Supplier Selection
Analytic Network Process
Decision Making Trial and Evaluation Laboratory
Majid
Hoshmandi Maher
majidhooshmand@gmail.com
1
Ph.D student, Alame Tabatabaei Univercity.
LEAD_AUTHOR
Maghsoud
Amiri
amiri@atu.ac.ir
2
Professor, Allameh Tabatabaei University.
AUTHOR
Laya
Olfat
olfat@atu.ac.ir
3
Associate Professor, University of Allameh Tabataba'i.
AUTHOR
ORIGINAL_ARTICLE
Understanding the Determinants of RFID Adoption in Iran Case study: Automotive Manufacturing Industry
The radio identification technology (RFID) may change the nature of many industries in future years. The study concentrates on the factors affecting the adoption of RFID technology in the automotive parts manufacturing industry in Iran. The RFID adoption model contains factors like, technology, organization, and environment. Three models apply12variables. Technology related variables are relative advantage, complexity, compatibility, and cost. Organizational variables are top management support, company size, IT competency, and technical-organizational readiness. Environmental variables are competitive pressure, trade partner compulsion, and immediate data requirement. All the Iranian car manufacturers in 1390 are the study population 278 Morgan Corporation is the sample. Exploratory factor analysis results indicate that different factors from the technical knowledge affect RFID technology adoption.
https://jimp.sbu.ac.ir/article_87331_7eef8cddfdf93e01d443b7af25521434.pdf
2013-02-19
117
141
technology
RFID
Technology Adoption
TOE Model
Aliakbar
Jowkar
1
Assistant Professor, Payam Noor University.
AUTHOR
Ali
nasirzonouzi
nasiri1359@gmail.com
2
Instructor, Payam Noor University.
LEAD_AUTHOR
ORIGINAL_ARTICLE
Forecast of Energy Carriers’ Demand in Different Consumption Secotrs of Iran Using Fuzzy Linear Regression
In this research, energy carriers’ demand of different consumption sectors has been forecasted on regression and fuzzy linear regression approaches considering economic and social indicators. It should be noted that energy carriesr are petroleum products, natural gas and electricity and consumption sectors are residential and commercial sectors, transport, industry, agricultur and powerplants. Actual data of Iran from 1993 to 2010 are used to select suitable models and to illustrate capability of the approach in this regard. Furthermore, the energy carriers’ demand of different sectors for the period of 2012 to 2021 is estimated.
https://jimp.sbu.ac.ir/article_87332_5a95c0ceb599d1876721f299349e24c7.pdf
2013-02-19
143
165
Energy Demand Forecast
Energy Carriers
Fuzzy Linear Regression
Aliyeh
Kazemi
aliyehkazemi@ut.ac.ir
1
Assistant professor,Tehran University.
LEAD_AUTHOR
Mahnaz
Hosseinzadeh
mhosseinzadeh@ut.ac.ir
2
Ph.D student,Tehran University.
AUTHOR
ORIGINAL_ARTICLE
Checking the Performance Changes of Distribution Channels of Pars Khazar Company over Time using Window Analysis
Window analysis basically assumes that no technical change has taken place in the periods under review. This underlying assumption has been neglected in most research works. In the current study, using non-parametric statistical Wilcoxon test and Friedman test between two time periods and over two time periods, the shift frontier between the periods under review has been investigated and determined. Accordingly, the length of the windows was selected in the way that the basic assumption of window analysis was observed. In this research, the data of 7 distribution-channels of Pars Khazar Company was picked up in time periods of one year (2005-2011). After running the statistical tests, it was revealed that shift frontiers had occurred within the periods (2007 and 2008), (2008 and 2009) and (2010 and 2010). So four analyses with the lengths of 3, 1, 2, and 1 were performed in which the average performance of the units was obtained as 0.832, 0.987, 0.906 and 0.953, respectively.
https://jimp.sbu.ac.ir/article_87333_f7f01145681662e504a8b5a426c46c53.pdf
2013-02-19
167
183
Efficiency over Time
Window Analysis
Wilcoxon Test
Freidman Test, Shift Frontier
Mohammad Rahim
Ramazanian
m_ramazanian391@yahoo.com
1
Associate Professor, Guilan University.
AUTHOR
Reza
Esmaeilpour
esmaeilpour@guilan.ac.ir
2
Assistant Professor, Guilan University.
AUTHOR
Keikhosro
Yakideh
yakideh@guilan.ac.ir
3
Assistant Professor, Guilan University.
AUTHOR
Akram
Oveysi Omran
akramoveysi@gmail.com
4
MA Student, Guilan University.
LEAD_AUTHOR
Sahar
Majlessi
5
MA Student, Guilan University.
AUTHOR