@article { author = {Rajabi, Ahmad and Nadaf, Abdol Reza}, title = {Forecasting and Optimal Control of Outputs Country Industries with State Space Modeling and Laplace Transform Approch}, journal = {Journal of Industrial Management Perspective}, volume = {5}, number = {1}, pages = {119-135}, year = {2015}, publisher = {Shahid Beheshti University}, issn = {2251-9874}, eissn = {2645-4165}, doi = {}, abstract = {In this study the state space model and Laplace conversion for optimal control and forecast output of industrial groups were used. To this purpose, all industrial groups in the form of a system with specific data and the output were considered. Measure impacts of inputs on outputs or phrase calculated transfer function. So based on this method, state space equations in terms of all industrial groups were calculated with the Laplace transform, the behavior of industrial groups in the form of a system with multiple inputs and output was defined. With regard equations state space and Laplace, to predict and control the output of industrial groups in the future period, import input into the model and through this output was calculated. This method results in comparison with other methods showed that using state space control and forecast output is very good and the results, verify the claim determines.}, keywords = {State Space,Industrial Groups (ISIC3),Laplace Transform,Inputs and Outputs}, title_fa = {پیش‌بینی و کنترل بهینه ستاده‌های صنایع کشور با رویکرد مدل‌بندی فضای حالت و تبدیل لاپلاس}, abstract_fa = {در این مقاله، از روش مدل‌بندی فضای حالت و تبدیل لاپلاس برای پیش‌بینی و کنترل بهینه ستاده‌های (ارزش افزوده و ارزش محصولات تولیدی) صنایع کشور استفاده شده است. برای این منظور، ابتدا همه گروه‌های صنعتی درقالب یک سیستم با داده‌ها و ستاده‌های مشخص در نظر گرفته شدند و براساس ارتباط بین داده‌ها و ستاده‌ها طی سال‌های 1390- 1374، معادلات فضای حالت با توجه به عملکرد صنایع کشور برآورد شد. سپس با انجام عملیات لاپلاس، رفتار هریک از گروه‌های صنعتی در تبدیل داده‌ها به ستاده‌ها شناسایی و بر این اساس، برای پیش‌بینی و کنترل رفتار ستاده‌های هریک از گروه‌های صنعتی اقدام شد. نتایج حاصل از روش پیشنهادی نشان دادند که استفاده از این روش در کنترل و پیش‌بینی بهینة ستاده‌ها درمقایسه با روش‌های موجود، مخصوصاً تابع انتقال، بسیار کاراتر است؛ چون اولاً روش پیشنهادی برای سیستم‌های دارای چندین ورودی و خروجی مناسب‌تر است و نتایج مطمئن‌تری را ارائه می‌کند و ثانیاً با توجه به معادلات فضای حالت تبدیل ورودی‌ها به خروجی‌ها، رفتار سیستم قابل شناسایی خواهد بود و با شناخت رفتار سیستم می‌توان داده‌های مورد نظر را به سیستم وارد کرد و بر این اساس، ستاده‌ها را به‌صورت بهینه پیش‌بینی و کنترل کرد.}, keywords_fa = {فضای حالت,گروه‌های صنعتی,تبدیل لاپلاس,داده‌ها و ستاده‌ها}, url = {https://jimp.sbu.ac.ir/article_87267.html}, eprint = {https://jimp.sbu.ac.ir/article_87267_7459eed4625abc6d90d7b9b661cd9122.pdf} }